ASSEMBLY
Place all parts of the exercise cycle in a cleared area and remove the packing materials. Do not dispose of the packing materials until assembly is completed.
In addition to the included hex keys, assembly requires a phillips screwdriver 
and an
adjustable wrench 
.
As you assemble the exercise cycle, use the drawings below to identify small parts. The number in parentheses below each drawing is the key number of the part, from the PART LIST near the end of this manual. The number following the parentheses is the quantity used in assembly. Note: Some small parts may have been pre- assembled for shipping. If a part is not in the parts bag, check to see if it has been preassembled.
M10 Split | M4 x 12mm | M4 x 16mm | M4 x 19mm |
Washer | Screw | Screw | Screw |
M6 x 10mm | M6 x 30mm Button |
| M10 x 50mm Button |
Screw | Screw |
| Screw |
| M10 x 85mm Button |
| |
| Screw |
|
|
1.Attach the Front Stabilizer (2) to the Frame (1) with two M10 x 85mm Button Screws (56).
1 |
1 |
2 |
56 |
5
