HOW TO FOLD AND MOVE THE INCLINE TRAINER
HOW TO FOLD THE INCLINE TRAINER FOR STORAGE
Before folding the Incline Trainer, adjust the incline to the lowest position. If this is not done, the Incline Trainer may be permanently damaged. Remove the key and unplug the power cord. CAUTION: You must be able to safely lift 45 pounds (20 kg) to raise, lower, or move the Incline Trainer.
1. Hold the Incline Trainer with your hands in the location shown by the arrow at the right. CAUTION: To decrease the possibility of injury, bend your legs and keep your back straight. As you raise the Incline Trainer, make sure to lift with your legs rather than your back. Raise
the Incline Trainer about halfway to the vertical position.
2.Move your right hand to the position shown and hold the Incline Trainer firmly. Using your left hand, pull the latch knob to the left and hold it. Raise the Incline Trainer until the latch pin is aligned with the indicated hole in the catch. Insert the latch pin into the hole. Make sure that the latch pin is fully inserted into the hole.
To protect the floor or carpet from damage, place a mat under the Incline Trainer. Keep the Incline Trainer out of direct sunlight. Do not leave the Incline Trainer in the storage position in temperatures above 85° Fahrenheit.
Knob |
Hole |
HOW TO MOVE THE INCLINE TRAINER
Before moving the Incline Trainer, convert the Incline Trainer to the storage position as described above. Make sure that the latch pin is fully inserted into the hole in the side of the Incline Trainer.
1.Hold the handrails as shown and place one foot against a wheel.
2.Tilt the Incline Trainer back until it rolls freely on the wheels. Carefully move the Incline Trainer to the desired location.
Never move the Incline Trainer without tipping it back. To reduce the risk of injury, use extreme caution while moving the Incline Trainer. Do not attempt to move the Incline Trainer over an uneven surface.
3.Place one foot against a wheel, and carefully lower the Incline Trainer until it is resting in the storage position.
Wheels 
Base
28
