7.Attach the Tray (90) to the handrail assembly with two #8 x 1/2" Screws (1).
With the help of a second person, hold the handrail assembly near the Right Upright (78) and the Left Upright (74). Connect the Upright Wire (38) to the console wire. See the inset drawing. The connectors should slide to- gether easily and snap into place. If they do not, turn one connector and try again. IF THE
CONNECTORS ARE NOT CONNECTED PROPERLY, THE CONSOLE MAY BE DAM- AGED WHEN THE POWER IS TURNED ON.
Remove the wire tie from the Upright Wire (38).
8.Set the handrail assembly on the Uprights (74, 78). Be careful not to pinch the wires.
Attach the handrail assembly to the Uprights (74, 78) with six 5/16" x 1" Bolts (7) and six 5/16" Star Washers (10) as shown.
See assembly steps 4 and 6. Firmly tighten the 3/8" x 4" Bolts (6).
9.With the help of a second person, hold the con- sole assembly near the handrail assembly. Connect the two wires from the console assem- bly to the two wires from the handrail assembly.
See the inset drawing in step 7. The connec- tors should slide together easily and snap into place. If they do not, turn one connector and try again. IF THE CONNECTORS ARE
NOT CONNECTED PROPERLY, THE CON- SOLE MAY BE DAMAGED WHEN THE POWER IS TURNED ON.
7
1
90
1 Handrail Assembly
| 74 | |
Console |
| |
Wire | 38 | |
| ||
38 | Console | |
Wire | ||
|
Wire Tie
|
|
|
| 78 |
8 |
|
|
| Handrail |
|
|
|
| Assembly |
| 10 | 7 | 7 |
|
7 | 10 |
|
|
|
|
|
|
| |
|
|
| 10 |
|
| 74 |
|
| 10 |
|
|
|
| |
|
|
| 7 | 78 |
9 |
|
|
|
|
| Console |
|
|
|
| Assembly |
|
|
|
Wires
Wires
Handrail
Assembly
9
