Manuals / NordicTrack / Fitness & Sports / Treadmill

NordicTrack NTL10841 manual Troubleshooting, Problem The power turns off during use, Top View

Models: NTL10841

1 34
Download 34 pages 25.99 Kb
Page 25
Image 25

TROUBLESHOOTING

Most treadmill problems can be solved by following the steps below. Find the symptom that applies, and follow the steps listed. If further assistance is needed, please call our Customer Service Department toll- free at 1-888-825-2588, Monday through Friday, 6 a.m. until 6 p.m. Mountain Time (excluding holidays).

PROBLEM: The power does not turn on

SOLUTION: a. Make sure that the power cord is plugged into a surge suppressor, and that the surge suppressor is plugged into a properly grounded outlet (see page 9). Use only a single-outlet surge suppressor that meets all of the specifications described on page 9. Important: The treadmill is not compatible with GFCI-equipped outlets.

b. After the power cord has been plugged in, make sure that the key is fully inserted into the console.

c.Check the reset/off circuit breaker located on the treadmill frame near the power cord. If the switch protrudes as shown, the circuit breaker has tripped. To reset the circuit breaker, wait for five minutes and then press the switch back in.

PROBLEM: The power turns off during use

c

Tripped

Reset

SOLUTION: a. Check the reset/off circuit breaker (see the drawing above). If the circuit breaker has tripped, wait for five minutes and then press the switch back in.

b. Make sure that the power cord is plugged in. If the power cord is plugged in, unplug it, wait for five minutes, and then plug it back in.

c. Remove the key from the console. Reinsert the key fully into the console.

d. If the treadmill still will not run, please call our Customer Service Department, toll-free.

PROBLEM: The displays of the console do not function properly

SOLUTION: a. Remove the key from the console and unplug the power cord. Carefully tip the treadmill down as shown in drawing a. Remove the Front Belly Pan Screws (3) and the Screws (83) from the hood. Make a note which holes the Screws are removed from. Raise the Uprights (69) and carefully remove the hood.

Locate the Reed Switch (10) and the Magnet (7) on the left side of the Pulley (8). Turn the Pulley until the Magnet is aligned with the Reed Switch. Make sure that the gap between the Magnet and the Reed Switch is about 1/8”. If necessary, loosen the Screw

(27)and move the Reed Switch slightly. Retighten the Screw. Re-attach the hood, making sure the Screws are returned to the same hole they were removed from. Run the treadmill for a few minutes to check for a correct speed reading.

a

 

69

3

 

 

83

1/8”

8

27

 

10

7

Top

 

View

 

25

Page 24 Page 26
Page 25
Image 25
NordicTrack NTL10841 manual Troubleshooting, Problem The power turns off during use, Top View
Page 24 Page 26

NTL10841 specifications

The NordicTrack NTL10841 is a treadmill designed for fitness enthusiasts seeking an advanced and versatile workout experience. Known for its robust build and array of features, this equipment aims to bring the gym experience into your home.

One of the standout features of the NTL10841 is its 10-inch smart touchscreen display. This vibrant display not only provides clear visibility of workout metrics but also offers access to iFit technology. With iFit, users can enjoy thousands of on-demand workouts led by certified trainers, covering various training styles from high-intensity interval training to endurance runs. Users can even simulate outdoor runs with Google Maps, providing a realistic running experience without leaving the comfort of home.

The NTL10841 treadmill also comes with a powerful motor designed for smooth and consistent performance. Its incline capability allows users to vary their workouts, making them more challenging and effective. The incline feature often ranges up to 12 percent, enabling runners to mimic hill training. Additionally, the decline option enhances this functionality by allowing users to train on a downward slope, giving a more dynamic workout.

In terms of design, the NTL10841 features a spacious running surface that measures 20 inches by 60 inches, accommodating users of various heights and stride lengths. The FlexSelect cushioning system is another significant characteristic, allowing users to customize the treadmill's impact on their joints—choosing between a cushioned surface for joint protection and a firmer deck for a more road-like experience.

Safety is also a priority with the NordicTrack NTL10841. An easy-to-reach safety key ensures that the treadmill stops immediately in case of an emergency. Furthermore, the treadmill is equipped with built-in speakers and Bluetooth connectivity, allowing users to listen to music or podcasts while they run, enhancing their overall workout experience.

With its sturdy construction and variety of features, the NordicTrack NTL10841 is ideal for all levels of fitness enthusiasts. Whether training for a race or maintaining overall health, users will appreciate the combination of technology and performance in this treadmill. Overall, the NTL10841 stands out as a reliable and feature-packed machine that can help users achieve their fitness goals effectively.