NordicTrack NTL11806.0 manual HOW to Connect AN Antenna, HOW to Connect a 75 OHM Catv Cable

Before the personal television can be used, you must connect an antenna, a 75 ohm CATV cable, or a VCR to the 75 ohm antenna terminal on the treadmill frame. Note: No antenna, cable, or adapter is included.

HOW TO CONNECT AN ANTENNA

300 Ohm Flat Wire

Indoor Antenna

1. Place a VHF

antenna in the

desired loca-

tion. Connect

the 300 ohm

flat wire from

the antenna to

a 300 ohm to

75 ohm

adapter.

2. Push the 300

ohm to 75 ohm

Screwdriver

VHF 300

Ohm Flat

Wire

300 to 75 Ohm Adapter

VHF

1.See the drawing near the bottom of this page. Connect the 300 ohm flat wire from the antenna to a 300 ohm to 75 ohm adapter.

2.Push the 300 ohm to 75 ohm adapter onto the 75 ohm antenna terminal on the treadmill frame near the power cord.

75 Ohm CATV Cable

1.See the drawing near the bottom of this page. Connect the 75 ohm CATV cable from the antenna to the 75 ohm antenna terminal on the treadmill frame near the power cord.

HOW TO CONNECT A 75 OHM CATV CABLE

adapter onto

the 75 ohm an-

tenna terminal

on the treadmill

frame near the

power cord.

Antenna

300 to 75 Ohm

Adapter

75Ohm Terminal

1.Connect a 75 ohm CATV cable to the 75 ohm antenna terminal on the treadmill frame near the power cord.

75 Ohm CATV Cable

75 Ohm Terminal

HOW TO CONNECT A VCR

Outdoor Antenna

Note: Outdoor antennas are subject to weathering that can reduce signal quality. Inspect your antenna and the lead-in wiring before connecting the antenna.

Combination
VHF/UHF Antennas
300 Ohm
Flat Wire
75 Ohm	75 Ohm
Terminal	CATV Cable
300 to 75
Ohm Adapter
75 Ohm CATV Cable

1.Connect one end of a 75 ohm CATV cable to the video output jack on your VCR.

2.Plug in the power cord of your VCR. See your VCR user’s manual for proper grounding instructions.

3.Connect the 75 ohm CATV cable to the 75 ohm an- tenna terminal on the treadmill frame near the power cord.

HOW TO CONNECT A DVD PLAYER OR A VCR

Plug the three-pronged end of an RCA component audio/video cable into your DVD player or VCR, and plug the other end into the audio/video input jack on the back of the console base.

HOW TO CONNECT A PERSONAL AUDIO/VIDEO PLAYER DIRECTLY TO THE CONSOLE

Locate the audio/video plug below the television on the console, and plug it into a jack on your MP3 player, CD player, or personal video player.

13