![](/images/new-backgrounds/1222223/22222311x1.webp)
ASSEMBLY
Assembly requires two persons. Set the treadmill in a cleared area and remove all packing materials. Do not dispose of the packing materials until assembly is completed.
Note: The underside of the treadmill walking belt is coated with
Assembly requires the included allen wrench and your own phillips screwdriver
and
wire cutters . For help identifying the assembly hardware, see the hardware drawings below.
Star Washer | 3/4” Tek Screw | 1” Tek Screw |
| Short Console | |
|
| Bolt |
Extension Screw | 3/4” Screw | Handrail Bolt |
|
| |
Console Bolt | Pulse Bar Bolt |
1.Open parts bag A. With the help of a second person, carefully raise the Uprights (85) and the Frame (55) to the position shown.
While the other person holds the Uprights (85) and the Frame (55), slide the two Base Extensions (90) onto the two brackets on the base of the Uprights. Make sure that the Base Extensions are turned so the Base Pads (81) are beneath it. Note: It may be helpful to tip the Uprights forward as you insert the Base Extensions.
1 |
|
| 85 |
| 55 |
| Brackets |
90 | 90 |
81 | 81 |
|
6