Manuals / NordicTrack / Fitness & Sports / Treadmill

NordicTrack NTL16905.0 user manual Gap between the Magnet and the Reed Switch is, Top

Models: NTL16905.0

1 34
Download 34 pages 47.96 Kb
Page 28
Image 28

Next, locate the Reed Switch (14) and the Magnet (12) on

 

 

the left side of the Pulley (11). Turn the Pulley until the

29

 

Magnet is aligned with the Reed Switch. Make sure that

1/8”

the gap between the Magnet and the Reed Switch is

 

11

about 1/8”. If necessary, loosen the indicated Screw (29),

14

12

move the Reed Switch slightly, and then retighten the

 

 

 

Screw. Reattach the hood and run the treadmill for a few

Top

 

minutes to check for a correct speed reading.

 

View

 

 

 

PROBLEM: The walking belt slows when walked on

SOLUTION: a. Use only a single-outlet surge suppressor that meets all of the specifications described on page 11.

b. If the walking belt is overtightened, treadmill perfor- mance may decrease and the walking belt may be permanently damaged. Remove the key and UN- PLUG THE POWER CORD. Using the included allen wrench, turn both rear roller adjustment bolts counter- clockwise 1/4 of a turn. When the walking belt is prop- erly tightened, you should be able to lift each edge of the walking belt 3 to 4 inches off the walking platform. Be careful to keep the walking belt centered. Then, plug in the power cord, insert the key, and run the treadmill for a few minutes. Repeat until the walking belt is properly tightened.

b

3–4”

Rear Roller Bolts

c. If the walking belt still slows when walked on, please see the front cover of this manual.

PROBLEM: The walking belt is off-center or slips when walked on

SOLUTION: a. If the walking belt is off-center, first remove the key and UNPLUG THE POWER CORD. If the walking belt has shifted to the left, use the allen wrench to turn the left rear roller bolt clockwise 1/2 of a turn; if the walking belt has shifted to the right, turn the bolt counterclockwise 1/2 of a turn. Be careful not to overtighten the walking belt. Then, plug in the power cord, insert the key, and run the treadmill for a few minutes. Repeat until the walking belt is centered.

b.If the walking belt slips when walked on, first remove the key and UNPLUG THE POWER CORD. Using the allen wrench, turn both rear roller bolts clockwise 1/4 of a turn. When the walking belt is correctly tight- ened, you should be able to lift each edge of the walking belt 3 to 4 inches off the walking platform. Be careful to keep the walking belt centered. Then, plug in the power cord, insert the key, and walk on the treadmill for a few minutes. Repeat until the walking belt is properly tightened.

a

b

28

Page 27 Page 29
Page 28
Image 28
NordicTrack NTL16905.0 Gap between the Magnet and the Reed Switch is, Top, Problem The walking belt slows when walked on
Page 27 Page 29

NTL16905.0 specifications

The NordicTrack NTL16905.0, commonly known as the NordicTrack Commercial 1750 Treadmill, is designed to deliver an exceptional fitness experience, making it a popular choice for home workouts. This treadmill boasts a robust build combined with advanced features that cater to both beginners and seasoned athletes.

One of the standout characteristics of the NTL16905.0 is its powerful motor. With a 3.75 continuous horsepower motor, it ensures a smooth and quiet operation, allowing users to run at varying speeds and inclines without electronic distractions. The treadmill can reach speeds of up to 12 miles per hour, enabling users to customize their workouts according to their fitness goals.

The incline feature is another noteworthy aspect of this treadmill. The NTL16905.0 offers an impressive incline range of 0 to 15 percent. This ability to incline simplifies the simulation of hill workouts, which increases cardiovascular engagement and enhances calorie burn.

For comfort during workouts, the NordicTrack Commercial 1750 incorporates a spacious running surface measuring 22 inches by 60 inches. This generous tread area provides ample space for runners to move freely without feeling confined. Additionally, the FlexSelect cushioning system allows users to customize their running experience by choosing between a softer, joint-friendly surface or a firmer, more road-like feel.

The treadmill also integrates cutting-edge technology. Equipped with a 10-inch touchscreen display, users can easily navigate through their workout programs, monitor performance metrics, and access iFit, NordicTrack’s subscription-based training app offering interactive workouts led by certified trainers. iFit provides a diverse range of virtual workouts, global routes, and personalized coaching, making each session engaging and motivating.

Connectivity options include Bluetooth compatibility, allowing users to sync their devices and listen to music through built-in speakers. Also, the treadmill features adjustable vents for optimal cooling, a convenient fan, and storage compartments, making it a practical choice for home environments.

In summary, the NordicTrack NTL16905.0 is a treadmill that combines powerful performance, user-friendly technology, and comfort in one machine. Its advanced features, such as the potent motor, adjustable incline, spacious running area, and innovative interactive training options, make it an exceptional choice for individuals seeking to elevate their fitness journey at home.