![](/images/new-backgrounds/1254275/25427527x1.webp)
HOW TO USE A PRESET PROGRAM
1Insert the key into the console.
See HOW TO TURN ON THE POWER on page 11.
2Select one of the preset programs.
To select one of the six preset programs, press the Program Select but- ton repeatedly until “P 1,” “P 2,” “P 3,” “P 4,” “P 5,” or “P 6” appears in the Calories/Pulse display.
As each preset program is selected, the maximum speed setting of the program and the maximum incline setting of the program will flash in the dis- plays for a few seconds. The Time/Distance dis- play will show
how long the program will last.
A profile of the speed settings of
the program will scroll across the matrix.
3crease button to start the program.
A moment after the button is pressed, the tread- mill will automatically adjust to the first speed and incline settings for the program. Hold the handrails and begin walking.
Each program is divided into 30, 50, or 60 one- minute segments. One speed setting and one in- cline setting are programmed for each segment. Note: The same speed setting and/or incline setting
may be programmed for two or more consecutive segments.Press the Start button or the 1 Step Speed in-
(The incline settings are not shown in the matrix.) The speed settings for the following segments will be shown in the columns to the right.
When only three seconds remain in the first seg- ment of the program, both the Current Segment column and the column to the right will flash and a series of tones will sound. If the speed and/or the incline of the treadmill is about to change, the speed setting and/or the incline setting will flash in the displays to alert you.
When the first segment is completed, all speed settings will move one column to the left. The speed setting for the second segment will then be shown in the flashing Current Segment column and the treadmill will automatically adjust to the speed and incline settings for the second seg- ment. Note: If all seven indicators in the Current Segment column are lit, the speed settings may move downward so that only the highest indicators appear in the matrix.
The program will continue in this way until the speed setting for the last segment is shown in the Current Segment column and the last segment ends. The walking belt will then slow to a stop.
If the speed or incline setting for the current segment is too high or too low, you can manually override the setting by pressing the Speed or Incline buttons. Every few times a Speed button is pressed, an additional indicator will light or darken in the Current Segment column; If any of the columns to the right of the Current Segment col- umn have the same number of lit indicators as the Current Segment column, an additional indicator may light or darken in those columns as well.
Important: When the current segment of the program ends, the treadmill will automatically adjust to the speed and incline settings for the next segment.
To stop the program at any time, press the Stop button. The time will begin to flash in the Time/Distance display. To restart the program,
The speed set- ting for the first segment will be shown in the flashing Current Segment column of the matrix.
Current Segment
press the Start button or the 1 Step Speed in- crease button. The walking belt will begin to move at 1 mph. When the next segment of the program begins, the treadmill will automatically adjust to the speed and incline settings for the next segment.
14