ASSEMBLY
Assembly requires two people. Set the treadmill in a cleared area and remove all packing materials. Do not dispose of the packing materials until assembly is completed. Assembly requires the included allen wrench
and your own phillips screwdriver 
.
Note: The underside of the treadmill walking belt is coated with
1. With the help of a second person, carefully raise the | 1 |
|
|
|
|
treadmill to the upright position. |
|
|
|
| |
|
|
|
|
| |
While a second person tips the treadmill to one side |
|
|
|
|
|
and holds it, insert one of the Extension Legs (102) into |
|
|
|
|
|
the treadmill as shown. Make sure that the Extension |
|
|
|
|
|
Leg is turned so the Base Pad (99) is on the bottom. |
|
|
|
|
|
Next, tip the treadmill to the other side and insert the |
|
|
|
|
|
other Extension Leg (not shown) in the same way. Lower |
|
|
|
|
|
the side of the treadmill so that both Extension Legs |
|
|
|
|
|
(102) are resting flat on the floor. |
|
| 102 |
|
|
|
|
|
|
| |
|
|
|
| 99 |
|
2. With the help of a second person, carefully lower the | 2 |
|
|
|
|
treadmill frame and then tip the Uprights (69) down as |
|
|
|
| |
|
|
|
|
| |
shown. Make sure that the Extension Legs (102) re- |
|
|
|
|
|
main in the Uprights. |
|
|
|
|
|
Attach each Extension Leg (102) with two Screws (80) as |
| 99 |
|
|
|
|
|
|
|
| |
shown. |
| Frame |
|
|
|
With the help of a second person, carefully tip the |
|
|
|
| 69 |
Uprights (69) back to the vertical position. | 69 |
|
|
| |
|
|
|
| 80 | |
Note: One replacement Base Pad (99) may be included. |
|
|
|
| |
| 80 |
| 102 | ||
Use the extra Pad if one becomes worn or needs to be re- | 99 |
|
|
| |
placed. | 102 |
|
|
| |
|
|
|
| ||
|
|
|
|
| |
3. Place one of the Handrail Spacers (65) on the right | 3 | Cutout | A |
| |
Upright (69) as shown, with the cutout toward the tread- |
| ||||
|
|
|
|
| |
mill (see inset drawing A). Pull the Upright Wire Harness |
| 81 |
|
|
|
(98) up through the Handrail Spacer. Place the other |
|
|
|
|
|
Handrail Spacer on the left Upright (not shown). |
|
| 66 |
| 69 |
|
|
|
| ||
|
|
|
|
| |
Have a second person hold the Handrails (66) near the |
|
|
|
| 65 |
Uprights (69) as shown. Connect the Upright Wire |
| 98 | 69 | B | 98 |
Harness (98) to the wires extending from the right |
|
|
| ||
Handrail. Insert the connectors and the Wire Harness |
|
|
|
|
|
(98) into the hole in the Console Base (81) (see inset |
|
|
|
|
|
drawing B). |
|
|
|
|
|
Be careful not to pinch the Wire Harness (98) as you set |
| 65 |
|
|
|
|
|
|
| 81 | |
the Handrails (66) on the Spacers (65). |
|
|
|
| |
|
|
|
|
| |
6
