Tiger JD 5101E, JD 5083E Assembly Wheel Spacer With Wheel Well Tank, Driveshaft Coupler - Loader

ASSEMBLY

WHEEL SPACER WITH WHEEL WELL TANK

When the left wheel is off, a spacer kit is needed with the wheel well tank (part# 06200637.) Attach the spacer to the left wheel portion of the axle with the hardware provided. When you are ready to re-attach the left wheel, the wheel goes on first then the reinforcement ring and finally the hardware provided.

DRIVESHAFT COUPLER - LOADER

To access the driveshaft of the JD-5101E, a hole will need to be cut in the front of the tractor frame. After cutting a hole into the front casting the bottom edge of the hole needs to be beveled out at a 45° angle with a grinder or file. Also the short end of the coupler connects to the driveshaft and the longer end connects to the pump.

Assembly Section 2-4