MAINTENANCE
RECOMMENDED FILLING INSTRUCTIONS
FOR REAR FLAIL GEAR BOX
When filling or checking the fluid level, the unit should be parked on a level surface with rear flail down on surface, shut “OFF”, and cold, (at ambient temperature).
Remove the fluid level plug located on the side of the gear box.
The gear box should be filled to the bottom of the fluid level hole. If nessecary, use 75 - 90 wt. PAO Synthetic Extreme Pressure Gear Lube to raise level to bottom of the hole.
Do not
Rear Flail gear box
Fluid level plug
Input shaft | Gear box |
guard | drain plug |
Side & Rear flail Maintenance Section
