Tiger JD 5093E, JD 5083E, JD 5101E manual Maintenance Weekly or Every 50 Hours, Trouble Shooting

MAINTENANCE

WEEKLY OR EVERY 50 HOURS

ITEM	SERVICE			COMMENTS
In Tank Hyd. Fluid	Change			Change after first 50
Filter				hours only, then every
(10 micron filter)				500 hours or yearly
In-Line High Pressure	Change			Change after first 50
Filter				hours only, then every
(10 micron filter)				500 hours or yearly
MONTHLY OR EVERY 150 HOURS
Hydraulic Fluid Level	Check			Add as needed
Hyd. Tank Breather	Clean / Check / Replace			Clean or replace
				Element as required
Rear Tire Type			Max P.S.I.
480/80R38				29
18.4-34				26
18.4-38				26
YEARLY OR EVERY 500 HOURS
Hyd. Tank Fluid	Change
In Tank Hyd. Fluid	Change
Filter
(10 micron filter)
In-Line High Pressure	Change		or	Change when indicated
Filter				by restriction indicator.
(10 micron filter)
Hyd. Tank Breather	Change
	TROUBLE SHOOTING
SYMPTOMS		CAUSE		REMEDY
Vibration	1.	Loose bolts	1.	Check all bolts and tighten to
				torque specs. in this section.
	2.	Cutter assembly	2a. Check for damaged blades, disc.
		Unbalanced		or cutter shaft. Replace if needed.
			2b. Check for wire, rope, etc. entangled
				in cutter assembly
Mower will not lift	1.	Hyd. Fluid low	1.	Check and refill Hyd. Fluid
	2.	Leaks in line	2.	Tighten or replace fittings and hoses
	3.	Faulty relief valve 3.		Check pressure in line. Line
		in Control Valve		pressure should be at least 2500 PSI
	4.	Kinked or blocked 4.		Clean or replace lines
	5.	Faulty cylinder	5.	Inspect, repair or replace cylinder

Side & Rear flail Maintenance Section 4-4