Current Segment

When you select a preset program, the left side of the main display will flash the maximum incline setting of the program and the right side of the display will flash the maximum speed setting of the program for ten seconds. Three seconds after a preset program is selected, the name of the se- lected program and the total program time will begin to scroll across the main display.

The program dis- play will show the first thirteen speed settings for the program you have selected.

3 Press the Start Program button or the Speed + button to start the program.

A moment after the button is pressed, the tread- mill will automatically adjust to the first speed and incline settings for the program. Hold the handrails and begin walking.

Each program is divided into several time seg- ments of different lengths. The main display shows both the time remaining in the program and the time remaining in the current segment of the pro- gram. One speed setting and one incline setting are programmed for each segment. The speed setting for the first

segment is shown

in the flashing Current Segment column of the pro- gram display. (The incline set- tings are not

shown in the program display.) The speed set- tings for the next thirteen segments will be shown in the thirteen columns to the right.

When only three seconds remain in the first seg- ment of the program, both the Current Segment column and the column to the right will flash, a se- ries of tones will sound, and all speed settings will move one column to the left. The speed setting for the second segment will then be shown in the flashing Current Segment column and the tread- mill will automatically adjust to the speed and in- cline settings for the second segment.

The program will continue in this way until the speed setting for the last segment is shown in the Current Segment column and no time remains in the program. The walking belt will then slow to a stop.

Note: Each time a segment ends and the speed settings move to the left, if all of the indicators in the Current Segment column are lit, the speed set- tings may move downward so that only the highest indicators in the columns will appear in the pro- gram display. When the speed settings move to the left again and not all of the indicators in the Current Segment column are lit, the speed settings will move back up.

If the speed or incline setting for the current segment is too high or too low, you can manually override the setting by pressing the Speed or Incline buttons on the console. Every few times one of the Speed buttons is pressed, an additional indicator will light or darken in the Current Segment column. If any of the columns to the right of the Current Segment column have the same number of lit indicators as the Current Segment column, an additional indicator may light or darken in those columns as well. Note: If you manually adjust the speed setting so that all of the indicators in the Current Segment column are lit, the speed settings in the program display will not move downward as described above. Note: If you manually override the speed or incline setting for the current seg- ment, when the segment ends the treadmill will automatically adjust to the speed and incline settings for the next segment.

To stop the program temporarily, press the Stop button. The time will begin to flash in the main dis- play. To restart the program, press the Start Program button or the Speed + button. To end the program, press the Stop button, remove the key, and then reinsert the key.

4 Follow your progress with the displays.

See step 5 on page 11.

5 Measure your heart rate if desired.

See step 6 on page 12.

6 When the program has ended, remove the key.

Step onto the foot rails and make sure that the in- cline of the treadmill is at the lowest level. Next, remove the key from the console and put it in a se- cure place. Note: If the displays and indicators on the console remain lit after the key is re- moved, the console is in the “demo” mode. Refer to page 24 and turn off the demo mode.

When you are finished using the treadmill, move the on/off switch near the power cord to the off position and unplug the power cord.

13

Page 12 Page 14
Page 13
Image 13
NordicTrack NTTL18990 manual Follow your progress with the displays, Measure your heart rate if desired
Page 12 Page 14

NTTL18990 specifications

The NordicTrack NTTL18990 is an advanced treadmill designed to elevate your home workout experience through a combination of innovative technology, versatile features, and user-friendly design. This model is a testament to NordicTrack's commitment to quality, allowing users to enjoy both performance and convenience as they pursue their fitness goals.

One of the standout features of the NTTL18990 is its impressive 22-inch interactive touchscreen display. This high-definition screen not only allows for easy navigation but also provides access to a rich library of on-demand and live workouts, led by certified personal trainers. The iFit integration allows you to take your workouts to the next level with globally inspired runs, interactive coaching, and the ability to track your progress over time. With thousands of workouts available, users can enjoy a diverse range of fitness routines that keep them motivated and engaged.

The NTTL18990 is equipped with a powerful 3.6 HP motor, ensuring smooth and consistent performance during even the most intense workouts. Its 0-12% incline capability provides a tailored workout experience that targets different muscle groups and increases calorie burn. Additionally, the treadmill features a spacious running surface of 60 inches by 20 inches, offering ample room for users of all strides and sizes.

In terms of comfort, the NTTL18990 utilizes NordicTrack's FlexSelect cushioning technology, which allows users to adjust the level of impact on their joints. This feature is particularly beneficial for those who may be recovering from injuries or who want to mitigate stress on their knees during running sessions. Furthermore, the built-in speakers and Bluetooth connectivity enable users to enjoy their music or workout guidance without any hassle.

Another practical characteristic of the NTTL18990 is its foldable design. This space-saving feature is perfect for individuals with limited space at home, allowing them to easily store the treadmill when not in use. With a hydraulic lift system, users can effortlessly fold and unfold the treadmill, enhancing convenience further.

Overall, the NordicTrack NTTL18990 presents a robust option for fitness enthusiasts looking to invest in a comprehensive home workout solution. With its blend of advanced technology, performance features, and user-centric design, this treadmill stands out as a powerful tool for reaching personal fitness milestones.
Top Page Image Contents