4. Insert two Handrail Bushings (94) into the right Upright | 4 |
|
(83). Turn the Handrail Bushings so they fit against the |
| |
|
| |
Upright as shown in the inset drawing. |
| 73 |
|
| |
Insert two Handrail Bolts (96) with Handrail Washers |
| 92 |
(95) into the Handrail Bushings (94), the right Upright |
| |
| 83 | |
(83), and the right Handrail Spacer (92). Lift up the right |
| |
Handrail (73) and align the Bolts with the holes in the |
| 94 |
Handrail. Next, thread the Bolts into the Handrail. Do |
| 95 |
not tighten the Bolts yet. |
| |
|
| |
Attach the left Handrail (not shown) in the same way. |
|
|
Tighten all four Handrail Bolts (96). | 94 |
|
| 95 | 96 |
5.Make sure that all parts are tightened before you use the treadmill. Keep the included allen wrench in a secure place. The allen wrench is used to adjust the walking belt (see page 27). To protect the floor or carpet from damage, place a mat under the treadmill.
7
