Nautica 200 Installation Guide
North American ISDN Information
If you require ISDN in North America, do the following:
•Ensure that you know whether the ISDN line is configured in standard national ISDN mode or in the manufacturer’s custom mode.
•Find out if your ISDN interface is
•Ensure that you have the same switch type configured as your ISDN provider’s central office. If you are unsure of the switch type, check with your ISDN service provider.
•Ensure that you have the local directory numbers assigned to the line by your ISDN service provider.
•Ensure that you have the Service Profile Identifiers (SPIDs) for the local directory numbers, also assigned by your ISDN service provider.
Hardware Installation
This section describes the physical installation of the Nautica 200. For safety, follow all of the steps in the order presented.
Connecting the Cables
The Nautica 200 package includes all of the required cables. For a list of the cables, see "Checklist" on page 2.
Figure 1 and Figure 2 show the ports on the back of the Nautica 200 and the recommended installation procedure. A description of each numbered item in the figure follows.
| 5 |