Nortel Networks 200 manual Rev Vii

•When you request ISDN “U” Interface Service, you must provide the telephone company with

--The Facility Interface Code: 02IS5

--The Service Order Code(s) (SOC): 6.0F

--The required Universal Service Order Code (USOC) jack: RJ49C

•When you request ISDN “S/T” Interface Service, you must provide the telephone company with

--The Service Order Code(s) (SOC): 6.0P

--The make, model number, and FCC Registration number of the NT1

Note: ISDN S/T cannot be directly connected to the network.

•When you request Primary Rate ISDN Service, you must provide the telephone company with

--The Facility Interface Code: 04DU9-1SN (1.544 MB, ESF framing format with B8ZF coding)

--The Service Order Code(s) (SOC): 6.0Y

--The required Universal Service Order Code (USOC) jack: RJ48C

2.Your telephone company may make changes to its facilities, equipment, operations, or procedures that could affect the proper functioning of your equipment. The telephone company will notify you in advance of such changes to give you an opportunity to maintain uninterrupted telephone service.

3.If the unit causes harm to the telephone network, the telephone company may temporarily discontinue your service. If possible, they will notify you in advance, but if advance notice is not practical, you will be notified as soon as possible and will be informed of your right to file a complaint with the FCC.

4.If you experience trouble with the unit, please contact the Bay Networks Technical Solutions Center in your area for service or repairs. Repairs should be performed only by service personnel authorized by Bay Networks, Inc.

United States	1-800-2LAN-WAN
Valbonne, France	33-4-92-96-69-68
Sydney, Australia	61-2-9927-8800
Tokyo, Japan	81-3-5402-0180

5.You are required to notify the telephone company when you disconnect the unit from the network.

117236-B Rev. 00 vii