Nortel Networks 210667-A manual Introduction, Precautions, Requirements

Introduction

The e-mobility 802.11b Wireless LAN DSSS Access Point (AP) provides a bridge between Ethernet wired LANs and e-mobility wireless networks. It provides transparent access between Ethernet wired networks and radio-equipped mobile units (MUs). MUs include all of Nortel Networks™ e-mobility™terminals, scanners, third-party devices, and other equipment.

The access point provides an 11 Mbps data transfer rate on the radio network. For further information about access point configuration, refer to Reference for the e-mobility 802.11b Wireless LAN DSSS Access Point (part number 210669-x).

Precautions

Before installing the access point (AP) verify the following:

•The location for the unit is dry and dust free. Install in wet or dusty areas only with additional protection. Contact a Nortel Networks representative for more information.

•The environment has a temperature range between -20° C and 55° C.

Requirements

The minimum installation requirements for a single-cell, peer-to- peer network are a power outlet and an antenna.

Note: Use and test the radio network with a properly equipped e-mobility mobile unit.

7