Installing a Power Supply
Required tool: Phillips screwdriver
8957FA
1.If necessary, remove the filler panel from a power supply bay.
8958FA
2.Push the power supply firmly into the bay.
Note: If you are installing a power supply in a new chassis, be sure to remove the bag of dessicant from the middle power supply bay.
3.Tighten the retaining screws.
8959FA | 8960FA |
4.Connect the power cord to the power supply and to an AC power outlet that is on a circuit with no other equipment connected to it.
Connect each power supply in the chassis to a separate AC circuit.
2
