Chapter 9 Network Address Translation (NAT) 101

BCM50a Integrated Router Configuration — Advanced

Figure 38 15.2.1 – NAT Server Configuration

15.2.1 - NAT Server Configuration
Index= 1
-----------------------------------------------------------------
Name=
Active= No
Start port= 0 End port= 0
IP Address= 0.0.0.0
Press ENTER to Confirm or ESC to Cancel:

The following table describes the fields in this screen.

4Enter a port number in the Start Port field. To forward only one port, enter it

again in the End Port field. To specify a range of ports, enter the last port to

be forwarded in the End Port field.

Table 21 15.2.1: NAT Server Configuration

Field Description
Index This is the index number of an individual port forwarding server entry.
Name Enter a name to identify this port-forwarding rule.
Active Press [SPACE BAR] and then [ENTER] to select Yes to enable the NAT
server entry.
Start Port Enter a port number in the Start Port field. To forward only one port,
enter it again in the End Port field. To specify a range of ports, enter the
last port to be forwarded in the End Port field.
End Port
IP Address Enter the inside IP address of the server.
After you complete this menu, press [ENTER] at the prompt “Press ENTER to Confirm…”
to save your configuration, or press [ESC] at any time to cancel.