Nortel Networks CTA 150i manual Norstar KSU configuration

8Preparing for installation

Norstar KSU configuration

There are no specific configuration requirements to support TAPI applications on a Norstar KSU. Some configuration options commonly enabled by a CTI user for the “attached set” are:

Handsfree/Headset: Useful when performing extensive PC-based directory dialing

Offhook External Prime-Line:Allows a TAPI application to default dial internal or external calls

Offhook Linepool Prime-Line:Allows a TAPI application to default dial internal or external calls

Note 1: This release of the Norstar TAPI SP only supports control of the phone that is physically connected to the interface device.

Note 2: If CLID/ANI is supported by the KSU, TAPI applications will receive caller information even if the associated phone is not configured to display it.

Note 3: If Handsfree is enabled on the attached phone, remember to enable Auto handsfree as well.

Line cards

No special line card is required to connect a PC to the Norstar KSU.

Telephones supported

The following Norstar Telephones are supported:

•M7100

•M7208

•M7310

•M7324

Computer Telephony Adapter 150 Installation Guide