Norstar TAPI SP installation 11
The TAPI SP files are installed in the Windows System directory. As the files are installed, progress indicators appear on your screen.
Note: Under Windows 3.1, if the PC does not have Microsoft TAPI installed or has an earlier version of TAPI, the Norstar TAPI SP installer will install a new version of TAPI.
When all the files have been installed, the Connection Hardware Properties dialog box appears.
5.Select the Device Type appropriate to the interface device you have installed on your PC, as shown in Figure 3.
Figure 3 Connection Hardware Properties dialog box
The following interface devices are supported in this release:
•TelAdaptor
•CTA 100/200 (serial)
•CTA 150i
•CTA 200 (USB)
•CTA 500dm
6.Select the appropriate properties for the interface device you selected. Refer to your vendor documentation for more information, if required. By clicking Default, you can return the values to their system defaults. Note: You will be unable to modify properties for the CTA 200 interface device; simply select CTA 200 (USB) and go the step 7.
Computer Telephony Adapter 150 Installation Guide
