6
Make a data call
Release a data call
To release a call while in
asynchronous mode, use any of the
following methods:
Press the Break Key(s) on your PC
keyboard for 1.6 seconds or longer.
Note: This method is not supported on
terminals with non-overlapping timed
break.
Press the Break Key(s) on the PC Keyboard
three times in quick succession. The break
must be at least 100 milliseconds and all
three breaks must be within one second.
or or
/Press the Options Key on the telephone
and dial the Asterisk Key
+ • or or
Drop DTR (Data Terminal Ready).
Note: To drop DTR you need a
programmable F-Key designated as DTR.
Note: DTR can drop on its own and in this
case, the MCA connection automatically
drops.
Note: If the far end data device releases
the call, the MCA automatically drops its
end.
Release a synchronous call using one
of these methods:
/
+ •
Press the Options Key on your telephone
and dial the Asterisk Key
When a data call is disconnected, the
terminal displays the following:
RELEASED
or
NO CARRIER (AT dialing mode)
Break Break Break
Options
Options