9
Keyboard dialing
This chapter explains the keyboard dialing commands and how to use them. You
can enhance your data call dialing by using features such as Speed Call and file
scripting.
Keyboard dialing is menu-driven. See Figure 1 for menus. Use them as a
reference when following procedures.
Each procedure in this chapter assumes you are beginning at the initial prompt of
ENTER NUMBER OR H (FOR HELP):
To get the initial prompt, hold down the break key(s) for at least 1.6 seconds and
press the carriage return (<CR>). This will release a current data call if you are on
one.
Abort current command
To abort the current command:
+
1. Press the Control Key and press the Z
Key.
RELEASED
<CR> 2. Press the Carriage Return.
ENTER NUMBER OR H (FOR HELP)
Note: This command will not work during
an active data call. First you must release
the call.
Auto Dial
To use Auto Dial:
<CR>
1. Select A (Auto Dial) and press the
Carriage Return.
CALLING
To define (change):
<CR>
2. Select M (Modify) and press the
Carriage Return.
Ctrl Z
A
M