Installing the AC power supply 19
CAUTION
Save the power filler panel in case you need to operate the 8300 Series chassis with a power supply removed.
2If you are replacing a failed power supply, then remove the failed supply.
For instructions, see "Removing the AC power supply" (page 20).
3Grasp the handle of the new power supply.
4Push the power supply firmly into the bay.
5Tighten the retaining screws until the power supply is seated firmly.
6Connect the power cord to the power supply and to an AC power outlet that is on a circuit with no other equipment connected to it.
Connect each power supply in the chassis to a separate AC circuit.
Nortel Ethernet Routing Switch 8300
Installation — AC Power Supply
4.027 August 2007
Copyright © 2007, Nortel Networks
