Managing network access devices from the SREM 41
3Change the desired settings, as described in the following table Table 14 "SREM Options" (page 41).
Table 14 SREM Options
Option | Description |
|
|
Application Look | Allows you to configure how the application looks. |
and Feel |
|
| Configuration changes to the Application Look |
| and Feel setting take effect only after you restart |
| SREM. |
|
|
Beep on Error | Select Yes from the list to have SREM beep |
| when an error is made. |
|
|
Eager Refresh | Automatically refreshes the Configuration and |
Mode | Monitoring pane with changes applied to the |
| device. |
|
|
Tool Tip from Help | Select Yes to view tooltip help over certain fields |
| and buttons. |
|
|
Show Uncomm | Select Yes to have SREM prompt you that |
itted Changes | uncommitted changes exist before leaving the |
Warning | active screen. |
| Click Yes on the prompt dialog to return to the |
| screen with changes, or click No to continue |
| to a new screen without saving the changes. |
| Selecting the check box before closing the |
| warning prompt changes this setting to No. |
|
|
Do Not Save | Select Yes to force SREM to check passwords |
Passwords | every time. |
| Important Note: If you select No for this option, |
| unauthorized users might gain access to the |
| SREM. Use caution when you change this option. |
|
|
4Click OK.
Managing network access devices from the SREM
This section covers the following tasks:
•"Adding a new network access device" (page 42)
•"Deleting a network access device" (page 44)
Nortel Secure Network Access Switch Software Release 1.6.1
Installing and Using Security and Routing Element Manager (SREM)
1.6.116 July 2007