Out of Range tones
NVPhone
No Network
Display reads: No network
Handset status | Tone |
|
|
Idle | 1 long beep and 2 short beeps |
|
|
Active call | 2 short beeps |
| You have 10 seconds to return |
| to range or the handset |
| disconnects. |
|
|
Accessing feature codes
Some of the NetVision and NetVision Data telephone call features are configured through the NetVision Phone Administrator. These features appear in the function menu on the display of your
handset. These features can be accessed from that menu in one of the following ways:
Accessing the menu features
If the feature is on the
1. | Press FCT (Function key) |
|
|
2. | Scroll to the menu item using |
| < and |
| |||
|
#> .
3.Press SND .
Accessing menu features by number
If you know the menu item number, you can access it by the menu number:
1.Press FCT (Function key)
2.Press the number(s) on the dialpad for the feature menu number.
Accessing Business Communication Manager feature codes
If the feature you want is not on the menu, use the following sequence to invoke the code:
1.Press FCT .
2.Find and select FEATURE on the menu.
3.Press SND .
4.Enter the feature code (listed below).
Or you can use one of the following shortcuts:
FCT 1<feature code> (idle line or during call) OR |
| < <feature code> | SND | (idle line only) |
|
| |||
Note: 1 indicates the menu position of FEATURE. |
|
|
|
|
Ending a DTMF feature: Press END to end sessions for DTMF features which require user input after starting a call and providing dialtone.
Page 4
