FCC Part 68 Compliance Statement

This equipment complies with Part 68 of FCC Rules. All direct connections to telephone network lines must be made using standard plugs and jacks compliant with FCC Part 68. Please note the following:

1.You are required to request service from the telephone company before you connect the unit to a network. When you request service, you must provide the telephone company with the following data:

When you request T1 Service, you must provide the telephone company with

--The Facility Interface Code

Provide the telephone company with all the codes below:

-04DU9-BN (1.544 MB, D4 framing format)

-04DU9-DN (1.544 MB, D4 framing format with B8ZF coding)

-04DU9-1KN (1.544 MB, ESF framing format)

-04DU9-1SN (1.544 MB, ESF framing format with B8ZF coding)

-04DU9-1ZN (1.544 MB, ANSI ESF and ZBTSI without line power)

The telephone company will select the code it has available.

--The Service Order Code(s) (SOC): 6.0F

--The required Universal Service Order Code (USOC) jack: RJ48C

When you request Primary Rate ISDN Service, you must provide the telephone company with

--The Facility Interface Code: 04DU9-1SN (1.544 MB, ESF framing format with B8ZF coding)

--The Service Order Code(s) (SOC): 6.0F

--The required Universal Service Order Code (USOC) jack: RJ48C

2.Your telephone company may make changes to its facilities, equipment, operations, or procedures that could affect the proper functioning of your equipment. The telephone company will notify you in advance of such changes to give you an opportunity to maintain uninterrupted telephone service.

3.If the unit causes harm to the telephone network, the telephone company may temporarily discontinue your service. If possible, they will notify you in advance, but if advance notice is not practical, you will be notified as soon as possible and will be informed of your right to file a complaint with the FCC.

4.If you experience trouble with the unit, please contact the Nortel Networks Technical Solutions Center in your area for service or repairs. Repairs should be performed only by service personnel authorized by Nortel Networks.

United States

1-800-2LANWAN

Valbonne, France

33-4-92-96-69-68

Sydney, Australia

61-2-9927-8800

Tokyo, Japan

81-3-5740-1700

5.You are required to notify the telephone company when you disconnect the unit from the network.

303127-D Rev 00

v

Page 5
Image 5
Nortel Networks V.34 manual FCC Part 68 Compliance Statement