Wireless-G ADSL Gateway

Optional Settings (required by some ISPs)

Host Name and Domain Name. These fields allow you to supply a host and domain name for the Gateway. Some ISPs require these names as identification. You may have to check with your ISP to see if your broadband Internet service has been configured with a host and domain name. In most cases, you can leave these fields blank.

MTU and Size. The MTU (Maximum Transmission Unit) setting specifies the largest packet size permitted for network transmission. Select Manual and enter the value desired in the Size field. It is recommended that you leave this value in the 1200 to 1500 range. By default, MTU is configured automatically.

Network Setup

Router IP. The values for the Gateway’s Local IP Address and Subnet Mask are shown here. In most cases, keeping the default values will work.

Local IP Address. The default value is 192.168.1.1.

Subnet Mask. The default value is 255.255.255.0.

Network Address Server Settings (DHCP). Configure the Gateway’s Dynamic Host Configuration Protocol (DHCP) settings in this section.

Local DHCP Server. A Dynamic Host Configuration Protocol (DHCP) server automatically assigns an IP address to each computer on your network for you. Unless you already have one, it is highly recommended that you leave the Gateway enabled as a DHCP server. You can also use the Gateway in DHCP Relay mode.

DHCP Relay Server. If you enable the DHCP Relay mode for the Local DHCP Server setting, enter the IP address for the DHCP server in the fields provided.

Advanced. To have the DHCP server reserve certain IP addresses for certain machines, click Advanced, enter each machine’s MAC address or host name along with the desired IP address, and enable the entry.

AutoDetect LAN DHCP Server. To automatically detect the network DHCP server, select Enable.

Starting IP Address. Enter a value for the DHCP server to start with when issuing IP addresses. This value must be 192.168.1. 2 or greater, because the default IP address for the Gateway is 192.168.1.1.

Maximum Number of DHCP Users. Enter the maximum number of users/clients that can obtain an IP address. The number will vary depending on the starting IP address entered.

Chapter 5: Configuring the Wireless-G ADSL Gateway

Figure 5-10: Optional Settings

Figure 5-11: Advanced DHCP

21

The Setup Tab

Page 28
Image 28
Nortel Networks WAG54G manual Optional Settings required by some ISPs, Network Setup

WAG54G specifications

Nortel Networks WAG54G is a robust and versatile wireless access gateway that has made significant strides in providing seamless connectivity for both home and small business environments. Designed with the intention of integrating both wired and wireless networking, this device bridges the gap between traditional Ethernet connections and the burgeoning needs of modern wireless communication.

One of the key features of the WAG54G is its ability to deliver high-speed Internet access through multiple protocols, including ADSL and DSL. This flexibility allows users to enjoy fast Internet speeds while simultaneously managing their internal network. The device is equipped with advanced Quality of Service (QoS) features that prioritize traffic, ensuring that critical applications receive the necessary bandwidth for optimal performance.

The WAG54G is powered by advanced 802.11g wireless technology, which offers wireless data rates of up to 54 Mbps. This enables users to stream videos, make VoIP calls, and engage in online gaming without significant lag, enhancing the overall user experience. The device supports a range of wireless security protocols, including WEP, WPA, and WPA2 encryption, ensuring that user data remains secure from potential threats and unauthorized access.

Another noteworthy characteristic of the WAG54G is its straightforward setup process. The unit comes with a user-friendly web interface that simplifies configuration, allowing users to customize their network settings with ease. The WAG54G also features multiple Ethernet ports for wired connections, making it an ideal solution for homes and offices with multiple devices requiring stable Internet connectivity.

In addition to its core functionalities, the WAG54G supports features such as network address translation (NAT) and a built-in firewall that enhances security while allowing multiple devices to share a single Internet connection. The device also incorporates features like DHCP server capabilities and UPnP support, streamlining network management.

Overall, Nortel Networks WAG54G delivers a compelling mix of performance, security, and manageability. Its combination of wired and wireless capabilities, alongside robust security measures, makes it suitable for various networking needs in today’s digital landscape. Users can count on the WAG54G to provide a reliable and efficient solution that supports the demands of modern Internet usage.