Wireless-G ADSL Gateway

The Advanced Routing Tab

The Advanced Routing screen allows you to configure NAT (Network Address Translation), dynamic routing, static routing, and PVC routing settings.

Advanced Routing

•Operating Mode. In this section, you can disable or enable the Network Address Translation (NAT) feature.

•NAT. NAT is a security feature that is enabled by default. It enables the Gateway to translate IP addresses of your LAN to a different IP address for the Internet. To disable NAT, click the Disable button.

•Dynamic Routing. If you have one or more other gateways or routers on your network, you may need to enable dynamic routing, static routing, or both. In dynamic routing, the Gateway learns routes to other networks by periodically communicating with other gateways and routers using RIP, the Routing Information Protocol. Dynamic routing lets the Gateway automatically adjust to changes in the network’s layout.

•RIP. If you have multiple routers, you may want to use RIP so the routers can exchange routing information with each other. To use RIP, select the Enabled radio button. Otherwise, keep the default, Disabled.

•Transmit RIP Version. To transmit RIP messages, select the protocol you want: RIP1, RIP1-Compatible (RIP1 broadcasts and RIP2 multicasts), or RIP2. If you don’t want to transmit RIP messages, select Disable.

•Receive RIP Version. To receive RIP messages, select the protocol you want: RIP1 or RIP2. If you don’t want to receive RIP messages, select Disable.

•Static Routing. For static routing, you input fixed routes to other networks by hand. This can be done to ensure that information travels by the most efficient path, or to avoid the overhead of RIP. To create a static route, change the following settings:

•Select set number. Select the number of the static route from the drop-down menu. The Gateway supports up to 20 static route entries. If you need to delete a route, then select the entry and click the Delete This Entry button.

•Destination IP Address. The Destination IP Address is the IP address of the remote network or host that will be reached through the static route. Note that a network address almost always ends in 0, and a host address never ends in 0.

•Subnet Mask. Enter the Subnet Mask (also known as the Network Mask), which determines which portion of an IP address is the network portion, and which portion is the host portion.

Chapter 5: Configuring the Wireless-G ADSL Gateway

Figure 5-14: Advanced Routing

24

The Setup Tab

Page 30 Page 32
Page 31
Image 31
Nortel Networks WAG54G manual Advanced Routing Tab
Page 30 Page 32

WAG54G specifications

Nortel Networks WAG54G is a robust and versatile wireless access gateway that has made significant strides in providing seamless connectivity for both home and small business environments. Designed with the intention of integrating both wired and wireless networking, this device bridges the gap between traditional Ethernet connections and the burgeoning needs of modern wireless communication.

One of the key features of the WAG54G is its ability to deliver high-speed Internet access through multiple protocols, including ADSL and DSL. This flexibility allows users to enjoy fast Internet speeds while simultaneously managing their internal network. The device is equipped with advanced Quality of Service (QoS) features that prioritize traffic, ensuring that critical applications receive the necessary bandwidth for optimal performance.

The WAG54G is powered by advanced 802.11g wireless technology, which offers wireless data rates of up to 54 Mbps. This enables users to stream videos, make VoIP calls, and engage in online gaming without significant lag, enhancing the overall user experience. The device supports a range of wireless security protocols, including WEP, WPA, and WPA2 encryption, ensuring that user data remains secure from potential threats and unauthorized access.

Another noteworthy characteristic of the WAG54G is its straightforward setup process. The unit comes with a user-friendly web interface that simplifies configuration, allowing users to customize their network settings with ease. The WAG54G also features multiple Ethernet ports for wired connections, making it an ideal solution for homes and offices with multiple devices requiring stable Internet connectivity.

In addition to its core functionalities, the WAG54G supports features such as network address translation (NAT) and a built-in firewall that enhances security while allowing multiple devices to share a single Internet connection. The device also incorporates features like DHCP server capabilities and UPnP support, streamlining network management.

Overall, Nortel Networks WAG54G delivers a compelling mix of performance, security, and manageability. Its combination of wired and wireless capabilities, alongside robust security measures, makes it suitable for various networking needs in today’s digital landscape. Users can count on the WAG54G to provide a reliable and efficient solution that supports the demands of modern Internet usage.
Top Page Image Contents