Maximum Output
Continuous Output
Voltage
Phase
Frequency
Power Factor
Minimum PTO HP
Input Shaft
120V Receptacle
120/240V Receptacle
Circuit Breaker
Gear Box
Gear Ratio
Gear Oil
Oil Capacity
Dimensions
Length
Width
Height
Gross Weight
27500 Watts (W)
24000 W
120 / 240 Volt (V)
Single phase
1.0
48 HP at 540 RPM
1 3/8” Diameter, 6 spline
(2)20 Amp (A) duplex (NEMA
30A Twistlock (NEMA
60A Straight blade (NEMA
100A Pin and sleeve (4100R12W)
(2)20A thermal, push to reset style
30A thermal, push to reset style
60A thermal magnetic
100A thermal magnetic
1:7
SAE
.53 Qt. (.5 L)
36.95” (93.9 cm)
16.85” (42.8 cm)
20.79” (52.8 cm) 425 lb. (193.2 kg)
ANSI SAFETY DEFINITIONS
DANGER indicates an imminently hazardous situation which, if not avoided, will result in death or serious injury. This signal word is to be limited to the most extreme situations.
WARNING indicates a potentially hazardous situation which, if not avoided, could result in a death or serious injury.
CAUTION indicates a potentially hazardous situation, which if not avoided, may result in minor or moderate injury. It may also be used to alert against unsafe practices.
MACHINE COMPONENT IDENTIFICATION
2