Return Line

Assembly Instructions

Step 14

Raise beam to vertical position as described in the SPLITTING OPERATION section of the manual Slightly loosen Hose Clamp on to the loose end of the Return line Slide the loose end of the Return Line onto the Return Line Fitting Tighten Hose Clamp

Step 15

Install loose end of Hydraulic Hose into the Swivel Fitting as shown and tighten the fitting connection to 47 lb-ft

(No hydraulic sealant required)

Step 16

Fill log splitter with hydraulic fluid as outlined in the Initial Unpacking

&Set-Up section of the manual. Fill engine with SAE 10W-30 as recommended by the engine manufacturer

Fig 02429

Hose

Clamp

Return Line

Fitting

Fig 02428

Hydraulic

Hose

Swivel

Fitting

Page 45

Image 45

North Star M1108D owner manual Return Line

M1108D specifications

The North Star M1108D is a versatile and advanced military vehicle designed to meet the rigorous demands of modern warfare. Known for its robustness and adaptability, the M1108D has been developed with state-of-the-art technologies and features that enhance its performance in diverse environments.

One of the standout features of the M1108D is its powerful drivetrain, equipped with a dependable turbocharged engine that delivers impressive horsepower and torque. This ensures the vehicle can traverse challenging terrains, whether urban landscapes or rugged off-road conditions, making it a reliable option for military operations.

The M1108D boasts an independent suspension system, providing excellent ride quality and stability, especially when navigating difficult ground surfaces. This system allows for improved handling, reducing the wear and tear on the vehicle while enhancing crew comfort during long missions.

In terms of protection, the vehicle is designed with advanced armor plating that offers a high level of ballistic and blast protection for its occupants. This ensures that personnel inside can operate with greater confidence, knowing they are shielded from potential threats. Additionally, the M1108D is equipped with upgraded defensive technologies such as smoke grenade launchers and jamming systems, further enhancing its survivability on the battlefield.

Another critical characteristic of the M1108D is its modular design, allowing for easy customization and adaptation. It can be configured for various roles, including troop transport, command and control, medical evacuation, or as a platform for weapon systems. This versatility makes it an ideal choice for diverse military operations.

The vehicle also integrates modern communication and navigation technologies, facilitating real-time coordination and situational awareness. These systems enhance operational effectiveness, allowing units to respond quickly and efficiently to evolving battlefield conditions.

Fuel efficiency is an essential aspect of the M1108D, as its engineering incorporates features that optimize consumption without compromising performance. This attribute extends operational range, ensuring that missions can be conducted with fewer logistical challenges.

Overall, the North Star M1108D exemplifies modern military vehicle design, combining durability, versatility, and advanced technological integration. Its myriad features make it a vital asset for armed forces, capable of adapting to the unpredictable nature of contemporary combat scenarios. As militaries around the world continue to evolve, the M1108D stands out as a reliable and effective solution for a range of operational needs.

Contents

M1108D Hazard Signal Word Definitions Table of Contents About Your Log Splitter Warranty RegistrationThis equipment to others About Your Log Splitter Safety Label Locations Split Control Lever Operation Description Machine Component Identification Initial Set-Up Wear between the keepers and beam Optional 4-Way Wedge Wings Way Wedge Wings Wing Assembly Moving and Towing to the Job Site Moving the log splitterImportant Make sure log splitter engine is off Towing Put front outrigger legAttach log splitter to vehicle hitch Important safety instructions Step One Inspect and maintain log splitter before each use Before Each Use-Inspection / MaintenanceRemove debris from engine, muffler, and moving parts Check fuel tank and fuel lines for leaks Hydraulic system Check the hydraulic system carefully Before Each Use-Inspection / Maintenance Before Each Use Fueling Remove gas cap Remove engine gas capAdd gasoline Before Each Use Work Site Selection & Set-Up Fire precautionsStep Three Work site selection and log splitter set-up Select location Lock both outrigger legs Block wheels Apply greaseLock both the outrigger legs in the Down position Splitting Operation General safety information Horizontal Set toOr vertical Clothing Lock rear outrigger leg in down position Vertical positionFingers or cause damage to the splitter Correct Log Orientation Load log Stop wedge Extend wedge Remove split wood After use Return wedgeRemove split wood from area Turn off engine Remove engine debris Short-Term Storage Storage Periodic Maintenance As specified in spark arrestor muffler manual Any Questions, Comments, Problems or Parts Orders Troubleshooting Specifications Parts Breakdown Exploded View 1108, 1109, 1114 Rev D ALL Summary of Important Safety Information for Operation Safety Before Use Read/instruct Safety During Inspection/MaintenancePersonal protective equipment Safety in Work Site Selection Safety During Fueling Safety During Use General Safety During Use Safety in Loading, Operating, and UnloadingLoading/Unloading Safety After use Assembly Instructions Assembly Instructions Step Bolt Catch Pin Towbar Outrigger Leg Fasten Horizontal Beam Lock to 1114 models only Tighten Idle Control Bolts to 20 lb- ft with a wrench Return Line