North Star S205 user manual Inserting Memory Cards, Formatting Memory Cards, Write Protect Switch

Inserting Memory Cards

BFormatting Memory Cards

If the message at right is displayed, the memory card must be formatted before use (A 138). Note that formatting permanently deletes all pictures and other data on the memory card. Be sure to make copies of any pictures you wish to keep before formatting the memory card.

When formatting the memory card, use the multi selector to choose Yes and press the k button. The confirmation dialog will be displayed. To start formatting, choose Format and press the k button.

P

Card is not formatted. Format card?

Yes

No

First Steps

•Do not turn the camera off or open the battery-chamber/memory card slot cover until formatting is complete.

•Be sure to use this camera to format memory cards previously used in other devices the first time they are inserted into the COOLPIX S205 (A 138).

BThe Write Protect Switch

Memory cards are equipped with a write protect switch. When Write protect switch this switch is in the “lock” position, data cannot be written to,

or deleted from, the memory card. If the switch is in the “lock” position, unlock it by sliding the switch to the “write” position to record or delete pictures, or to format the memory card.

BMemory Cards

•Use only Secure Digital memory cards.

•Do not perform the following during formatting, while data is being written to or deleted from the memory card, or during data transfer to a computer. Failure to observe this precaution could result in the loss of data or in damage to the camera or memory card:

-Take out the battery or memory card

-Turn off the camera

-Disconnect the AC adapter

•Do not format the memory card using a computer.

•Do not disassemble or modify.

•Do not drop, bend, or expose to water or strong physical shock.

•Do not touch the metal terminals with your fingers or metal objects.

•Do not affix labels or stickers to the memory card.

•Do not leave in direct sunlight, closed vehicles or areas exposed to high temperatures.

•Do not expose to humidity, dust, or corrosive gases.

21