3.Do not expose tool to moisture. Don’t use this machinery in damp or wet locations. Keep out of rain.
4.Keep work area clean. Cluttered areas invite injuries.
5.Keep children and pets away. All children should be kept away from the work area. Never let a child handle a tool without strict adult supervision.
6.Do not operate this tool if under the influence of alcohol or drugs or if you are tired. Read warning labels on prescriptions to determine if your judgment or reflexes are impaired while taking drugs. If there is any doubt, do not attempt to operate.
7.Use safety equipment. Eye protection should be worn at all times when operating this machine. Use ANSI approved safety glasses. Everyday eyeglasses only have impact resistance lenses. They are NOT safety glasses. Dust mask, respirator,
8.Wear proper apparel. Loose clothing, gloves, neckties, rings, bracelets, or other jewelry may present a potential hazard when operating this machine. Please keep all apparel clear of the machine.
9.Don’t overreach. Keep proper footing and balance at all times when operating this product.
10.Always disconnect the machine from power source before servicing or changing accessories.
11.Check for damage. Check your tool regularly. If part of the tool is damaged it should be carefully inspected to make sure it can perform its intended function correctly. If in doubt, the part should be repaired. Refer all servicing to a qualified technician. Consult your dealer for advice.
12.Keep away from flammables. Do not attempt to operate this tool near flammables or com- bustibles. Failure to comply may cause serious injury or death.
13.Do not start tool while it is resting on materials. Always turn tool on BEFORE coming in contact with material surface.
14.Do not set tool down until it has come to a complete stop.
15.Always check to make sure that trigger is not engaged before plugging tool in.
16.Keep hands clear of cutting edges and all moving parts.
17.Protect others in work area from debris such as chips and sparks. Provide barriers and shields as needed.
18.Secure work. Use a clamp, vise or other practical means to hold your work securely, freeing both hands to control the tool.
19.Use the right tool for the job. Do not use a tool or attachment to do a job for which it was not intended. Do not alter a tool.
20.Use proper accessories. Using accessories not recommended may be hazardous. Be sure accessories are properly installed and maintained. Do not defeat a guard or other safety device when installing an accessory or attachment.
21.Remove all adjusting keys and wrenches. Make a habit of checking that adjusting keys, wrenches, etc. are removed from the tool before turning it on.
22.Guard against electric shock. Prevent body contact with grounded surfaces such as pipes, radiators, ranges, and refrigerators. Hold your tool by insulated,
2
