For technical questions and replacement parts, please call
Model: _______________ Purchase Date: _______________
Save the receipt, warranty and these instructions. It is important that you read the entire instruction sheet to become familiar with this product before you begin using it. This product is designed for certain applications only. Northern Tool + Equipment strongly recommends that this product is not modified and/or used for any application other than that for which it was designed. If you have any questions relative
to a particular application, DO NOT use the product until you have first contacted
Northern Tool + Equipment to determine if it can or should be performed on the product. Before using this product, please read the following instructions carefully.
Technical Specifications
Item | Description | Item | Description |
Drive Size | 1/2" | Air Consumption | 5.6 CFM |
Free Speed | 7000 RPM | Air Inlet Diameter | 1/4"- 18NPT |
|
|
|
|
Max. Torque | 300 | Max. Air Pressure | 90 PSI |
|
|
|
|
SAVE THIS MANUAL
You will need this manual for the safety warnings and precautions, assembly, operating, inspection, maintenance and cleaning procedures, parts list and assembly diagram. Keep this manual and invoice in a safe and dry place for future reference.
WARNINGS AND SAFETY RULES
1.Wear proper clothing. Always use
2.Wear proper breathing protection. Remember that a "dust mask" is not a breathing respirator. Use a respirator that uses charcoal filters for the best protection.
3.Keep work area clean and well lighted. A dim and/or cluttered work area invites personal injury.
4.Keep children and pets away from work areas. Children can be a distraction and should be supervised by an adult when near the work area. Never allow children to play with this product even if it is turned off.
5.Store idle tools properly. Keep this tool out of the reach of children.
6.Do not use the Tool if under the influence of alcohol or prescription drugs. Doing so may cause damage to the tool, or personal injury. Do not use this or any tool if you are tired. Use common sense at all times.
7.Check for damaged parts. Before using this tool, carefully check for any parts that may be missing or damaged and any other conditions that may affect the operation of this tool. Replace or repair damaged and worn parts immediately using only qualified repair facility.
8.Always use the proper tools. This tool was designed for a specific task. Do not alter this tool, or use it for a purpose for which it was not intended.
9.Be careful when connecting/disconnecting air supply. It is recommended to use quick disconnects (not included) rather than
1 of 4
