Wiring, Brown Data input/output | NorthStar Navigation D210 guide

6 Wiring

•Red (+) Terminal

•Black (-) Terminal

•Orange External Buzzer

Use for optional external buzzer (use red (+) terminal to complete circuit). If unused then tape to avoid shorting.

• Brown Data input/output

Your Explorer D210 can be used as a repeater for another DPT or DBT NEMA depth sounder. If unused then tape to avoid shorting.

Bracket

RCA Jack Connector

If unsure about wiring contact your nearest Northstar dealer.

Buzzer

600 mm (24 inch) Power Cord

Red (+)

Black (-) Brown

Orange

Northstar Explorer D210 Installation and Operation Manual

9

Image 9

NorthStar Navigation D210 Wiring, Red + Terminal Black Terminal Orange External Buzzer, Brown Data input/output

Contents

Explorer D210 Important Safety Information Contents Alarms On/Off AlarmsShallow Alarm Deep Alarm Hold down during power up Instrument SetupKeel/Surface Offset Press simultaneously OFF Hold down during power up Transducer SettingDual Station Operation Units of Measure Linked or Separate Selection Master/Slave Selection Installation MaintenanceInstrument Installation Tighten the mounting nut until the bracket is secure Bracket RCA Jack Connector WiringBuzzer 600 mm 24 inch Power Cord Red + Black Brown Orange Red + Terminal Black Terminal Orange External Buzzer Appendix a Specifications No display Appendix B TroubleshootingNo depth reading -- at all depths Erratic readings while moored Americas Europe