![](/images/new-backgrounds/1135415/13541511x1.webp)
Setting the low fuel alarm
Use the key to select the alarm function. The LCD will indicate for two seconds and will then display the present alarm value. If no alarm value has been entered the LCD will indicate
.
FLOW TOTAL
Press and hold both keys for three seconds and the displayed value will begin to flash.
Press and hold for 3 seconds
Use the and
keys to select the desired alarm value. Press and hold both keys for one second to save this new value to memory and to exit this function. The display will indicate
and then the new value.
The arrow pointing at the alarm bell will be activated.
Alarm activation
If the fuel remaining value drops below the fuel alarm value, the alarm will sound and the alarm arrow will flash.
Press any key to mute the alarm. The alarm arrow will continue to flash as long as the alarm condition remains.
Resetting the TRIP LOG or the TOTAL LOG
To reset a log, press the key until the display indicates the name of the log to be reset.
Press and hold both keys for three seconds. Display will show or for 2 seconds before resetting to zero.
Press and hold for 3 seconds
The trip log value may be reset without changing the total log value.
If the total log is reset to zero, then the trip log will automatically reset to zero.
Note: If the total log exceeds 999 then both it and the trip log will be reset to zero.
6 | Northstar Explorer F210 Installation and Operation Manual |