Nostalgia Electrics CCM-527

It is very important that the unit be cleaned properly after every use. If it is not, the holes

will get clogged and sugar will not be able to sift through the tiny holes pro perly.

 Make sure unit is unplugged and has had time to cool down before cleani ng.

 First warm up the flossing head for 30 seconds with the heat switch, the n turn it off.

Turn on motor only, to start flossing head. Pour 2 tablespoons of warm w ater into

the top of the spinning head to blow all the sugar out. (DO NOT use heat w hile

cleaning.) Let the extractor head spin until all of the water has spun out. O nce

there is no more water spinning out of the head, turn motor off. (You may need to

do this several times to remove the sugar build up).

 Use a slightly damp, non-abrasive sponge or non-abrasive towel to wipe c lean the

outside of the unit. Wipe with a non-abrasive towel to dry. Do not use excess ive

water when cleaning this unit.

The OLD FASHIONED CARNIVAL COTTON CANDY CART™ breaks down to a cart

body, bowl, dome, and extractor head for easy cleaning.

EXCESSIVE VIBRATION

1. If the equip ment is new, verify that shipping bolts have been loosened and packing

materials were removed from the machine.

2. Check for stretched or uneven suspension springs.

3. Run the s ugar completely out, then check for foreign objects or sugar lumps in the

extractor head.

4. Foreign objects in the extractor head may cause an out-of-balance condit ion.

LOW PRODUCTION

1. Make sure you are using only granulated sugar or cotton candy flossing s ugar.

2. Check extractor head for foreign objects, materials or excessive sugar build up that

may cause a blockage.

MOTOR DOES NOT TURN ON OR EXTRACTOR HEAD DOES NOT SPIN

1. Make sure that plug is connected correctly in to the outlet.

2. Check and replace fuses if necessary. (See below)

 Using a flathead screwdriver, push in, turning

counter clockwise. (See Illustration)

 Fuse is now accessible and can be changed.

Once changed, push in and turn clockwise to lock

fuse into place.