Nostalgia Electrics RSM-650 manual Figure D

ENGLISH 3

2.Locate the locking tab on top of the slush mixing chamber lid (at the back and directly opposite the white Nostalgia Logo.) (Figure B)

Pinch the tab together while lifting up on the lid, carefully unhinging the front of the lid (at the white Nostalgia Logo) as you gently lift up. (Figure C)

FIGURE D

4.Separate the mixing mechanism from the cylinder cage by carefully lifting and unsnapping the three locking tabs triangularly located at the top of the cylinder cage. (Figure E)

FIGURE B

FIGURE C

3.Lift the aluminum ice cylinder and mixing mechanism/cylinder cage out of the clear mixing chamber.

(Figure D)

FIGURE E

5.Prepare for your first use by thoroughly washing the clear mixing chamber, aluminum ice cylinder, mixing mechanism and cylinder cage, in warm sudsy water. Rinse the parts well, and thoroughly dry. DO NOT put the motor base in water.

6.To clean the motor base and lid when needed, use a clean non-abrasive damp cloth to wipe the exterior, and then dry off with a clean, non-abrasive towel. (See Parts Breakdown below).

7.Reassemble your RETRO VERTICAL SLUSH MACHINE, make sure that you have securely latched the mixing mechanism to the cylinder cage and that the gear top is inserted into the mixing chamber lid. Confirm that you have also latched the lid securely to the clear mixing chamber.