ENGLISH 5
ASSEMBLY (Continued)
3. Connect the Base Supports by s crewing two of the #1 screws into the Cross Bar
(as shown below):
4. Connect the Leg Assembly by s crewing four of the #3 studs from the Base
Support into the Leg Assembly (as shown below). M ake sure to screw from the
Base Support into the Leg Assembly and not vice versa. Once the studs are
firmly screwed through, place the four #8 Nut Caps over the studs for cosmetic
purposes:
5. Now that the Leg Assembly and Base Support have been connected, use four of
the #2 screws to connect the Storage Compartment to t he Base Support (as
shown below). Once you have successfully screwed th e #2 screws through the
Storage Cabinet and into the Base Support, place the Bottom Plate underneath
the Storage Cabinet and attach it to the Base Support using four of the #1
screws: