ENGLISH 7
USING YOUR SNOW CONE CART™
First, find a stable surface near an electrical outlet bef ore starting. (Make sure your cord is
away from any water source. If needed, it is accepta ble to use an extension cord.)
1. Before plugging in your un it, add ice cubes by removing the clear lid from the
Main Unit of your SNOW CONE CART™. In order to do so , simply push the
release button on the lid, lift and remove. Once you have done this, plug in the
unit.
For Optimal Ice Shaving Results – Your ice cubes sh ould sit a short while before putting
them in the shaving unit. If your ice has a frosty look , it is much too hard to shave. If your
ice sits long enough to look clear and it is wet to the to uch, then it is ready to make your
SNOW CONE CART™ experience a fun one.
2. When ice cubes are ready, p lace cubes in the shaving unit while allowing enough
room for the lid to be placed back on the unit easily. Never f orce it shut.
3. Return the clear lid to the u nit and turn the power button to the ON position. This
will activate the unit to begin shaving. Please note that t he ice will not shave
unless the lid is properly secured.
4. Repeat steps 2 and 3 until you have shaved the amount of ice desired. Make
sure to unplug when you are finished.
5. Once you have the desired a mount of ice, open the housing door on the Main
Unit to retrieve your ice and use the recipes on the next page to create your
favorite snow based treats!
Should the ability of your SNOW CONE CART™ to properly shave ice diminish after a
lengthy period of normal use, replace it with the inclu ded Replacement Blade and Tool.
Should you need additional blades, you can order direc tly from the manufacturer.
Please note the following steps for replacing the blade:
1. Remove the Ice Tray and insert the Disassembly To ol (N under PARTS) over the three
arms of the Ice Hopper.