Novatel OM-20000141 user manual Hardware Set Up, Typical SPAN-IGM Set Up Serial Port Radio

Chapter 2 SPAN Installation

2.3Hardware Set Up

The following examples show the connections for a SPAN-IGM.

Figure 3: Typical SPAN-IGM Set Up – Serial Port

Radio

(optional for Real Time Differential operation)

NovAtel interface cables have more connections than are shown in the diagram. Additional connections were removed for clarity.

1.Mount the GNSS antenna, as described in Mount the Antenna on page 18.

2.Mount the SPAN-IGM, as described in Mount the SPAN-IGMon page 18.

3.Connect the GNSS antenna to the SPAN-IGM, as described in Connect the Antenna to the SPAN-IGMon page 19.

4.Connect power to the SPAN-IGM, as described in Connect Power on page 19.

5.Connect a serial port on your computer to the SPAN-IGM, as described in Connect a Computer to the SPAN-IGMon page 20.

6.Connect the serial port on the user supplied radio device (optional for real time differential operation) to COM3 on the AUX port on the SPAN-IGM.

7.Connect the I/O strobe signals (optional), as described in Connect I/O Strobe Signals on page 21.

16 SPAN-IGM User Manual Rev 2