Numark Industries AXIS 8 MOVING LOOP POINTS , RELOOP/STUTTER,

AXIS 8

MOVING LOOP POINTS

The “LOOP IN” point can be moved while the music is

playing just by pressing at the new desired point.

The next time “LOOP OUT” is reached the CD will return to

this new “LOOP IN” point. If “LOOP IN” is press after the

“LOOP OUT” point it will clear the “LOOP OUT” point.

The “LOOP IN” point can also be edited while paused. First

hold down then press to move to the loop in

point.

Next rotate the wheel to search for a new cue point

and then press again to set the new point.

Check your point by pressing .

The “LOOP OUT” point can also be moved while a

loop is playing. Press to release the old

“LOOP OUT” point and pressing it again at the new

desired point.

RELOOP/STUTTER This button performs 2 different functions depending on loop setting.

Reloop is only possible if “LOOP” points have been

previously set. The “RELOOP” function automatically returns

the music to the “LOOP IN” point and will play the loop until it

is released with the “LOOP OUT” button.

Stutter starts instant play from previously set “Hot” points.

Simply set your stutter (Hot Start) point by follow the

directions for setting loop in because the points are the same.

Remember the button serves also for the reloop function

so if a loop out has been set the unit will also loop until

released. This function lets you set 3 Hot Start points. The

first is based on the “PLAY” cue point and the second two are

based upon “LOOP IN”. Since the default “LOOP IN” points

are also the initial start point your unit can be “stutter” started

from up to 3 buttons.

NOTE: The CD Player will always remember a new set “Hot” points until you actually set a new “LOOP IN” point

or put in a new CD. The new point will be accessible until you remove the CD from the unit.

If you change tracks and you previously set a “Loop In” on another track, pressing will jump to that point.