Numark Industries AXIS 8 BEFORE SWITCHING OFF THE POWER:

AXIS 8

BEFORE SWITCHING OFF THE POWER:

When you have finished using the CD player, be sure that the disc tray is closed with the “OPEN/CLOSE” button before switching off the power.

DO NOT switch off the power when

the disc holder is open.

Switch off the power after the

disc holder has been closed

with the “OPEN/CLOSE” button

TROUBLESHOOTING:

Symptom Possible Cause Corrective Action

The power fails to switch on when the POWER

switch is set to on

Poor power plug connection at the AC outlet or

IEC Power cord loose from rear of unit

Insert the power plug firmly into the AC outlet

and make sure connection is good in unit rear

Disc play does not start The disc is loaded upside down

The disc is too dirty

Reload the disc with the label side up

Clean the disc

No sound Improper output cable connections

Improper amplifier operation

Connect the output cables correctly

Check amplifier setup

Sound skips

The CD player is subject to vibrations or

physical shock even with Anti-Shock™

The disc is too dirty

Change the installation location

Clean the disc

Hum

Loose cable connections Firmly connect all audio plugs

- The Leader in DJ Technology