Numark Industries C1 quick start BOX Contents, Registration Ground Rules, Connection Diagram

BOX CONTENTS

yC1

yIEC Power Cable

yQuickstart Guide

ySafety Instructions & Warranty Information

REGISTRATION

Please go to http://www.numark.com to register your C1. Registering your product ensures that we can keep you up-to-date with any last-minute product developments and provide you with world-class technical support, should you run into any problems.

GROUND RULES

1.Make sure all items listed in the BOX CONTENTS section are included in the box.

2.READ SAFETY & WARRANTY INFORMATION BOOKLET BEFORE USING THE PRODUCT.

3.Study the connection diagram in this guide.

4.Place mixer in an appropriate position for operation.

5.Make sure all devices are turned off and all faders and gain knobs are set to “zero.”

6.Connect all stereo input sources as indicated in the diagram.

7.Connect the stereo outputs to power amplifier(s), tape decks, and/or other audio sources.

8.Plug all devices into AC power.

9.Switch everything on in the following order:

•Audio input sources (i.e. turntables, CD players, etc.)

•Mixer

•Last, any amplifiers or output devices

10.When turning off, always reverse this operation by turning off:

•Amplifiers

•Mixer

•Last, any input devices

CONNECTION DIAGRAM

CD BURNER	TURNTABLE	TURNTABLE
HOUSE AMP

MICROPHONE

HEADPHONES

CD PLAYER CD PLAYER

CD PLAYER REMOTEMIXER

1