CM100
REAR PANEL FEATURES
| 36 | 38 | 29 | 28 |
|
|
|
| |
40 | 39 |
|
| 31 |
|
|
|
| |
| 37 | 35 34 33 32 | 30 27 |
|
27.Phono Inputs – for attaching your turntables. When these connectors are used, your signal is fed directly to the
28.Grounding lug - for turntable connection. Always use this connection when using turntables. (your turntable cable should have a grounding wire)
29.Line/Phono Input switch - to allow line level equipment to be plugged into your phono inputs giving you a total of 8 line input options.
30.Line Inputs – are unbalanced RCA jacks for connecting stereo audio from line level sources such as CD players, HiFi VCRs, cassette and
N O T E : Plug mono audio sources into both Left and Right inputs using a "Y" cable connector.
31.Mic Input – for your 1/4” Microphone plug.
32.Cue/Send Output – to temporarily send channel PFL signal to an external sampler or other source such as both monitor. Your PFL cue buttons selects the source.
33.Record Outputs – are unbalanced RCA jacks used to send the output of the program to any connected recording device.
34.Stereo Zone Outputs – are unbalanced RCA jacks controlled by the Booth/Zone Level control.
35.Stereo Main Outputs – are unbalanced RCA connectors controlled by the Master fader.
36.Stereo Balanced Main Outputs – are
37.Fader Start Connector – to attach your mixer to a remote start equipped Numark CD player using industry standard 1/8”(3.5mm) cables.
38.Equalizer Deactivation Switch – to turn off the EQ control and avoid accidental usage.
39.IEC Power Connector – to plug in your power cord.
40.Voltage Selector – to set to your country’s standard.
- The Leader in DJ Technology
©1999 | Industries | - 10 - | http://www.numark.com |
