Numark Industries CM-100 user manual Mixer Features, P U T S

CM100

MIXER FEATURES

8	3
	2

4

1

16			25
	19
15
		26

56

9

11

10

14				12
				13
							23
20			18
		21			22	24
	17

We have divided this section into various functional blocks: Inputs, Microphone, Crossfader, Equalizer, Outputs, and Headphone Cueing. It is important to learn how each of these work.

I N P U T S

1.Input faders - control individual source levels in the mix.

2.Input Toggle Switches - select which source will be live to that channel based on what you have connected to the rear panel input section.

3.Pre-fader Gain Controls – adjust the pre-fader volume for cleaner sound.

MICROPHONE

4.Mic Gain Controls – The DJ Mic Fader controls

the DJ Mic volume for the Neutrik™ “Combo” connector. The Mic 2 Fader controls the M i c volume for the 1/4” connector on the rear of the mixer.

5.Mic Talkover/On/Auto-Talkover Switch – controls DJ Mic only. Mic 2 activation is controlled only through the Mic 2 level fader.

Talkover turns down the input level of your music sources from Channels 1-4.

Auto-Talkoverautomatically reduces the input level of Channels 1-4. This works with the talk-over

s e n s i t i v i t y adjustment. Talkover is very useful for making announcements without adjusting any levels.

6.Talkover sensitivity adjust – determines the point in which auto-talkover activates. The more sensitive the adjustment, the quieter you need to speak into your microphone to activate auto-talkover.

7.Treble and Bass Controls – for fine-tuning the tone of your voice on both mics through the sound system. The controls are detented for setting tone "flat". For best results, use a dynamic cardioid microphone.

8. Neutrik™ “Combo” connector - allows connection

of either a 1/4” jack or an XLR jack. This is ideal for connecting an XLR gooseneck directly into the mixer.

CROSSFADER

9.Crossfader Assign Knob - determines which input channel will be heard when the crossfader is moved towards the knob.

N o t e : All channels not assigned will remain active.

10.Replaceable Crossfader - achieves clean segues between the two input channels selected by the Crossfader Assign.

In this example "Hard left" selects Channel 1 and "Hard right" selects Channel 4. With the crossfader centered, both assigned channels are live. Use the crossfader for fast and seamless segues from one selected channel to the other.

N o t e : The crossfader is user replaceable in case of failure. Simply unscrew the two large screws that hold it in place, lift it out and disconnect its cable. Re-attach the new crossfader and screw the mounting plate back onto the unit - you’re back in business!

11.Fader Start – activates the crossfader to send play and cue commands to your auto-start Numark CD player or other popular brand. For fader start, attach your mixer to a remote start CD player using industry standard 1/8”(3.5mm) cables. When you move the crossfader toward the active channel, the attached CD player will start. When it is moved away, that side will cue (similar to pressing the cue button).

- The Leader in DJ Technology

©1999 Industries - 8 - http://www.numark.com