Setting the ON timer
This feature allows you to program the TV to turn on automatically at a set time. If you program the ON TIMER to “DAILY,” the TV will turn on every day at the same time to the same channel until you clear the ON TIMER.
To set the ON timer: (Example: Turning on the TV to channel 2 at 6:30 AM, DAILY)
1.Press TV to select the TV mode.
2.Set the clock, if you have not already done so (see page 31.)
3.Press MENU, then press or to display the OPTION menu.
4.Press ▲ or ▼ to highlight ON TIMER.
5.Press or to highlight SET, then press ENTER. The ON TIMER menu appears. Press to set the time.
6.Press ▲ or ▼ to set the desired hour, then press .
Note:
After a power failure or disconnection of the power, the timer settings will be lost.
INPUT DISPLAY
|
| TV |
ON TIMER |
|
|
ON TIMER |
|
|
6: 30 AM |
| CH 2 |
|
| CLEAR |
RETURN |
| Menu/ |
|
| |
|
| Enter |
SELECT |
| ADJUST |
7. Set the desired minutes and channel, as in step 6. | ||
8. Press | or | to select ONCE or DAILY, then press ENTER. |
ON TIMER |
| Exit |
ON TIMER |
| |
6:30AM |
| CH 2 |
|
| ONCE / DAILY / CLEAR |
RETURN |
|
|
SELECT |
| ENTER:SET |
9. Press EXIT to return to normal viewing.
To cancel the on timer:
Select CLEAR in step 8, above.
Setting the sleep timer
the TV’s Features
You can use the sleep timer to automatically turn off the TV at a set time.
To set the sleep timer:
Repeatedly press SLEEP on the remote control to set the length of time until the TV turns off. The clock will increase 10 minutes for each press of the SLEEP button (0h00m, 0h10m, ...1h50m, 2h00m.) After the sleep timer is programmed, the display will appear briefly every ten minutes to remind you that the sleep timer is operating.
To confirm the sleep timer setting:
Press SLEEP one time. The remaining time will be momentarily displayed.
INPUT DISPLAY
TV
Using
To cancel the sleep timer:
Repeatedly press SLEEP until the display turns to 0h00m.
Sleep
Note:
If the remote control does not operate your TV, press the “TV” button on the remote control and try again.
32
32 | 3/7/06, 6:25 PM |