45
Introduction Connecting your TV Setting up your TV Using the TV’s Features Appendix
Notes:
•If you wish to change the on-screen lan-
guage, follow the steps 1-4 on page 23.
•If no buttons are pressed for more than
approx. 60 seconds, the PC Monitor Menu
screen will return to normal Monitor screen
automatically.
•The PC Monitor Menu settings are not
effective for normal TV mode or external
input modes.
Picture/Audio adjustmentsin PC modeThere are a number of picture settings you can adjust to optimize the
performance of the TV in PC mode.
Example: Adjust the contrast.
1. Press TV to select the TV mode.
2. During PC mode, press MENU, then press or to display the
PICTURE menu.
3. Press ▲ or ▼ to highlight CONTRAST.
4. Press or to adjust the contrast level.
5. Press EXIT to return to normal viewing.
Resetting your picture/audio adjustments
in PC mode
The RESET function returns your picture quality adjustments to the
following factory settings:
PICTURE menu AUDIO menu
Brightness............ center (25) Bass .......................center (25)
Contrast ............... center (50) Treble .....................center (25)
Red ...................... center (25) Balance .................. center (0)
Green................... center (25)
Blue...................... center (25)
To reset your picture/audio adjustments:
1. Press TV to select the TV mode.
2. Press MENU during PC mode.
3. Press 2 or 3 to select the desired menu.
4. Press ▲ or ▼ to highlight RESET, and then press .
PICTURE menu settings:
BRIGHTNESS: To adjust the brightness of PC Monitor screen.
CONTRAST: To adjust the contrast of PC Monitor screen.
HOR POSITION: To adjust the horizontal position of the image on
the PC Monitor screen. Each video standard will
require a different value for this setting.
VER POSITION: To adjust the vertical position of the image on the
PC Monitor screen. Each video standard will re-
quire a different value for this setting.
PHASE: This must be adjusted after the frequency has been
set to optimize picture quality.
CLOCK: To minimize any vertical bars or stripes visible on
the screen background.
RED/GREEN/BLUE: To adjust the color temperature of the PC Monitor
screen.
WVGA INPUT: Set to ON, when you select the WVGA mode on
the PC.
WXGA INPUT: Set to ON, when you select the WXGA mode on
the PC.
AUDIO menu settings:
BASS/STREBLE/BALANCE: To adjust the sound quality of PC
mode.
STABLE SOUND: To turn on or off the
StableSound
®
feature in PC
mode.
WOW SRS 3D: To tur n on or off the surround
effect in PC mode.
WOW FOCUS: To turn on or off the vocal
emphasis effect in PC mode.
WOW TruBass: To select your desired bass
expansion level (HIGH, LOW or
OFF) in PC mode.
Note:
If the remote control does not operate your TV,
press the “TV” button on the remote control
and try again.
Menu/Enter
Exit
TV
PICTURE Menu AUDIO Menu
Using the TV’s Features
3X70701A_En_p42-45 3/7/06, 6:25 PM45