Starting setup, Changing the on-screen display language

ENTER: SET

LANGUAGE / LANGUE / IDIOMA

ENGLISH FRANÇAIS ESPAÑOL

Starting setup

The STARTING SETUP feature appears the first time you turn on the TV, and helps you select the menu language, specify the TV/CABLE setting, and program channels automatically.

IMPORTANT: Make sure that the antenna or cable TV system is connected.

1.Press TV to select the TV mode.

2.Press POWER to turn on the TV. The STARTING SETUP function begins and the language setup menu appears on the screen. Press ▲ or ▼ to select your desired

language, then press ENTER.

3. Press ▲ or ▼ to select TV or CABLE, then press ENTER.

4. Press ▲ or ▼ to select START, and :SELECT then press ENTER, which

starts the AUTO SETUP.

Note:

To cancel the setup and return to the regular TV screen, press ▲ or ▼ to select CANCEL and press ENTER.

5.When the AUTO SETUP is complete, the regular TV screen appears.

Notes:

•AUTO SETUP of channels may take 15–30 minutes to complete, depending on your regional cable service.

•To cancel the AUTO SETUP and return to the regular TV screen, press EXIT.

After you have installed the batteries and programmed the remote control, you need to set some preferences on the TV using the menu system. You can access the menu system with the buttons on the remote control.

•When you make a menu selection, your changes are immediate. You do not have to press MENU or EXIT to save your changes.

•After one minute, the menu screen will automatically close if you do not make a selection. Your changes will still be saved.

•When you are finished programming the menus, press EXIT.

Changing the on-screen display language

You can choose from three different languages (English, French and Spanish) for the on screen displays. Adjustment menus and messages will appear in the language of your choice.