EM360

CROSSFADER

18.Replaceable Crossfader - achieves clean segues between the two input channels selected by the Crossfader Assign.

Note: The crossfader is a user replaceable item and subject to wear. Excessive force can wear out the fader quickly. This is not a warranted item. In case of failure. Simply unscrew the two large screws that hold it in place, lift it out and disconnect its cable. Re-attach the new crossfader and screw the mounting plate back onto the unit - you’re back in business!

19.Crossfader Assign Knob - determines which input channel will be heard when the crossfader is moved towards the knob. With the crossfader centered, both assigned channels are live. Use the crossfader for fast and seamless segues from one selected channel to the other.

20.Fader Start – activates the crossfader to send play and cue commands to your auto-start Numark CD player or other popular brand. For fader start, attach your mixer to a remote start CD player using industry standard 1/8”(3.5mm) cables. When you move the crossfader toward the active channel, the attached CD player will start. When it is moved away, that side will cue (similar to pressing the cue button).

KAOSS PAD*

21.Process buttons – send post channel fader audio to the KAOSS PAD for processing.

22.Process Blend Control – mixes processed (efx)-wetaudio with unprocessed (src)-dryaudio. Use this in conjunction with the KOASS pad to reach desired effects.

23.Preset Program keys (1–6)- You can assign programs to keys 1–6 for convenient selection.

Program assignment:

a)Press one of the PROGRAM MAP keys.

b)Use the PROGRAM knob to select the program that you wish to assign. If you wish to memorize the HOLD setting, turn the HOLD switch to ON after selecting the program, and touch the touch panel to specify the position.

c)Press and hold the PROGRAM MAP key you pressed in step 1 for approximately two seconds.

24.Touch panel- You can control the sound by using your finger to rub or tap (strike lightly) this panel. Never press down too hard on the touch panel, or place a heavy object on it. Rough handling can cause it to crack or break. Rubbing or pressing the touch panel with a sharp object can scratch it, so only use your finger to operate it. If cleaning is necessary, wipe only with a soft dry cloth. Using solvents such as thinner may melt the surface of the touch panel. Note: Affix the included protective label to extend product life.

25.Hold Switch- When this switch is ON, the current state of the effect will be maintained even if you remove your finger from the touch panel.

26.Program Knob- Use this knob to select programs (1–60). Please see page for a complete listing of effects.

27.Program/Location Display- This shows either the currently selected program number or the location of the point that you touched on the touch panel, depending upon mode.

•When selecting a program: the program number (1–60) will be displayed.

•When operating the touch panel: the position you touched (1.1–9.9) with 5.5 being the center) will be displayed.

28.EFX ON/OFF / Sample Record switch- This can be used to switch between the effect sound and the direct (unprocessed) sound, or to record a sample.

When sampling this button lets you record a phrase that you hear and then play it back by operating the touch panel.

Use the following procedure to record and playback samples.

•Using the PROGRAM knob or the PROGRAM MAP keys, select a sample/play effect (program numbers 51–60). The RECswitchLEDwillblink,andtheKAOSSPADwillbeinrecord-ready mode.Atthistime,thesoundwillbeoutputwithoutanychange.

•Press the REC switch to begin recording.

•Press the REC switch once again to stop recording. The REC switch LED will light. Even if you do not press the REC switch, recording will end automatically when the maximum recording time has elapsed. (The maximum recording time will depend on the program.)

•Operate the touch panel to playback the recorded phrase. The sound will change depending on the position where you touch the panel. The way in which the sound changes will depend on the program.

•To re-record, press the REC switch again. The previously recorded phrase will be erased, and a new phrase will be recorded.

If you change programs to a non-sample program, the recorded phrase will be erased.

Example display: 3.8

vertical position is (3) / horizontal position is (8)

If you select a program that has a Hold On setting, the

program number will be displayed, and then the position*KAOSS technology under license from KORG that is being held will be displayed.

- The Leader in DJ Technology

©2000Industries

- 5 -

http://www.numark.com

Page 4 Page 6
Page 5
Image 5
Numark Industries EM360 owner manual Crossfader
Page 4 Page 6

EM360 specifications

Numark Industries has long been a reputable name in the world of DJ equipment and audio technology, and the EM360 mixer is a prime example of their commitment to innovation and quality. Designed for both professional DJs and aspiring enthusiasts, the EM360 encompasses a myriad of features and technologies aimed at enhancing the audio mixing experience.

At the core of the EM360 is its highly intuitive mixer interface, offering a streamlined layout that facilitates effortless navigation. With its four-channel configuration, users can seamlessly blend tracks from multiple sources, including turntables, CDJs, and even digital audio from a laptop or mobile device. Each channel is equipped with a Gain control, EQ sliders, and an easy-to-use fader, enabling precise adjustments and a personalized sound profile based on individual preferences.

One of the standout features of the EM360 is its built-in effects processor, which allows DJs to apply creative audio effects on-the-fly. With a variety of effects, including reverb, echo, and phaser, DJs can elevate their mixes and add an extra layer of excitement to their performances. The comprehensive effects section can be easily adjusted using dedicated knobs, allowing for real-time manipulation of each effect.

The EM360 also integrates advanced connectivity options, ensuring compatibility with a wide range of devices. With multiple RCA inputs and outputs, USB connections, and XLR outputs, users can easily connect their favorite equipment without facing compatibility issues. This makes the EM360 versatile enough for various settings, whether in a club, studio, or at home.

In terms of build quality, Numark Industries utilizes durable materials that are designed to withstand the rigors of constant use. Its robust chassis is complemented by smooth faders and buttons that provide tactile feedback, ensuring reliable performance over time.

Another noteworthy characteristic of the EM360 is its compact design, making it an excellent choice for mobile DJs and those with limited space. Weighing in at a lightweight balance, it can be easily transported without compromising on functionality.

In summary, the Numark Industries EM360 mixer stands out as an exceptional tool for DJs looking to enhance their performance capabilities. With its versatile four-channel setup, intuitive interface, built-in effects, comprehensive connectivity options, durable build quality, and compact design, it's a worthy addition to any DJ's arsenal. Whether you're performing in front of a crowd or practicing your skills at home, the EM360 is engineered to support creativity and elevate the art of mixing.
Top Page Image Contents